Isspro R82032 Manuel d'utilisateur télécharger pdf

PERFORMAX

Form No. IS149 (Rev. A 03/11/2008)

ISSPRO, INC.



2515 N.E. Riverside Way



Post Office Box 11177



Portland, Oregon 97211-1899

503-288-4488



800-888-8065



Fax: 503-249-2999

PYROMETER AND THERMOCOUPLE INSTALLATION

INSTRUCTIONS

Models: R43021 R43022 R43031 R43032 R52021 R52022

R52031 R52032 R53021 R53022 R53031 R53032

R59021 R59022 R59031 R59032 R68021 R68022

R68031 R68032 R69021 R69022 R69031 R69032

R82021 R82022 R82031 R82032

I C O N K E Y

 CAUTION

 Tools may be required

 Shown in picture

 Disconnect batteries. Do not reconnect battery power until system is fully configured to

avoid risk of shock or fire.

 Install Thermocouple. The Thermocouple mounts

into a ⅛” pipe thread. If the exhaust manifold is already

drilled and tapped, the thermocouple can be installed at the

location. If none is provided, drill (with letter “R” bit) and

tap the hole using ⅛” NPT tap. Apply a small amount of

anti seize lubricant to the exposed threads of the fitting and

tighten using the hex (wrench flats) which are closer to the

tip of the thermocouple. Adjust the depth of the probe (tip

of the probe should be approximately at the center of the

exhaust flow), and tighten the outermost nut no more than

one full turn past finger tight.

Install Lead Wire. The lead wire assembly and the thermocouple are supplied with Delphi connectors

for assembly convenience. Simply snap together the connectors at either end of the thermocouple and

lead wire assemblies. Route the terminal end of the lead wire assembly to the Electronic Signal

Processor (ESP), making sure that the lead wire is clear of obstructions that might cut or otherwise

damage it.

Figure 1:

Exhaust, thermocouple and lead wire.

1 2

PERFORMAX 1

Résumé du contenu

Page 1 - PERFORMAX

PERFORMAX Form No. IS149 (Rev. A 03/11/2008) ISSPRO, INC.  2515 N.E. Riverside Way  Post Office Box 11177  Portland, Oregon 97211-1899 503-288-

Page 2

Form No. IS149 (Rev. A 03/11/2008) ISSPRO, INC.  2515 N.E. Riverside Way  Post Office Box 11177  Portland, Oregon 97211-1899 503-288-4488  800-8

Commentaires sur ces manuels

Pas de commentaire

Isspro R82032 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Isspro R82032. ISSPRO R82032 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Isspro R82032